Syba Tech Computer Hardware SD PEX10005 User Manual

SD-PEX10005 1  
PCIe Parallel Printer  
Controller Card  
Model: SD-PEX10005  
User Manual  
Ver. 2.00  
Chipset: Moschip MCS9901  
 
SD-PEX10005 3  
System Requirements  
- Supports Windows® XP/Vista/2000/7/8/Server 2003/ Server 2008, Linux, Mac  
OS/X 10.5, Dos 6.22  
Hardware Installation  
1. Turn off the power to your computer  
2. Unplug the power cord and remove your computers cover  
3. Locate an empty PCI Express x1, x4, x8, or x16 slot on the motherboard  
4. To install, carefully align the cards bus connector with the selected PCIe slot on  
the motherboard. Push the board down firmly.  
5. Replace the slot brackets holding screw to secure the card  
6. Replace the computer cover and reconnect the power cord  
Driver Installation  
Installing driver for supported Windows OS:  
1. Start Windows and insert the driver CD into the CD-ROM drive.  
2. Windows will automatically detect the card,.  
3. Select Browse my computer for driver software.  
4. Browse to the following folder on the driver CD according to your operating  
system:  
> Windows 2000:  
(CD Drive):\Moschip\MCS9900\Win2K_XP_Server2003\Windows2000  
 
SD-PEX10005 4  
> Windows XP 32-bit, Server 2003 32-bit:  
(CD Drive):\Moschip\MCS9900\Win2K_XP_Server2003\Windows32bit  
> Windows XP 64-bit, Server 2003 64-bit:  
(CD Drive):\Moschip\MCS9900\Win2K_XP_Server2003\Windows64bit  
> Windows Vista 32-bit, Server 2008 32-bit:  
(CD Drive):\Moschip\MCS9900\Vista_Server2008\ Windows32bit  
> Windows Vista 64-bit, Server 2008 64-bit:  
(CD Drive):\Moschip\MCS9900\ Vista_Server2008\Windows64bit  
> Windows 7 32-bit:  
(CD Drive):\Moschip\MCS9900\ Windows 7\Windows32bit  
> Windows 7 64-bit:  
(CD Drive):\Moschip\MCS9900\ Windows 7\Windows64bit  
5. Follow the on-screen instructions to install the driver.  
6. After successful installation, the device is listed in the Device Manager.  
Note: Drivers may need to be installed manually in certain situations  
1. Navigate to Device Manager  
2. In the Other Device sections, find "PCI Parallel Port"  
3. Right-click and Update Driver Software.  
4. Select “No, not this time” and click “Next >” to continue.  
 
SD-PEX10005 5  
5. Select: Browse my computer for driver software.  
6. Select: Let me pick from list of device drivers on my computer.  
7. Check in: Show compatible hardware.  
8. Click Parallel Port  
9. Click Have Disk button  
10. Click Browse, navigate to Driver Windows files:  
11. MCS9900 > MCS9900_XP > Win32/Win64 > StnPorts.inf ; click next  
12. Click “Continue Anyway”  
Drivers should be installed.  
Installing Driver for Linux OS, Mac OS, Dos  
Please refer to the installation manual located in the driver CD under these OS  
folders for instructions on installing the drivers.  
Note: Update drivers can be found here:  
 
SD-PEX10005 6  
FAQ  
Question: Can I change the address for the port I/O range?  
Answer: No, due to the chipset limitation our devices do not allow you to change  
the address for the I/O range.  
Question: I installed the card but it is not recognized in my system?  
Answer: Try reseating the card into another PCIe slot if available. If that fails try  
updating the motherboard/BIOS. Also ensure that any optional system updates  
have been applied.  
Question: I installed the card and the drivers but the device is still not working?  
Answer: Uninstall the device and drivers from the system. Reinstall the device  
and, manually install the drivers.  
Question: I try to install the drivers for the device but receive a Code: 10 error?  
Answer: This indicates a failure with the drivers being installed. Please download  
the latest drivers of the device and try again.  
Question: The device installed properly but keep disconnecting and reconnecting?  
Answer: Certain device will install properly yet act buggy. To remedy this  
problem download and, install the latest drivers for the device from the  
manufacturer website.  
 
SD-PEX10005 7  
Version Information  
Version: 2.0  
Date Updated: 3/21/2014  
Changes/Fixes:  
- Compiled manual information into .pdf format.  
- Cleaned up wording and text throughout the previous 1.0 manual.  
- Added documentation for manual driver install  
- Added chipset model to document.  
- Added FAQ of general information.  
 

Shiro Cordless Telephone SD8301 User Manual
Shure Headphones miniature microphone User Manual
SnapGear Network Card SnapGear User Manual
Sony Car Stereo System MEX DV1100 User Manual
Sony Projection Television KP 6lHS20 User Manual
Sony Stereo System STR DB840 User Manual
Spirit Elliptical Trainer XE 125 User Manual
Stiga Lawn Mower 12 4301 22 User Manual
Sunwave Tech Universal Remote SRC 3310 9320 User Manual
Sylvania Stereo System SRCD5670 User Manual