SIIG Log Splitter 04 0945A User Manual

1x2 HDMI Splitter with  
4Kx2K & EDID Management  
Installation Guide  
Introduction  
The 1x2 HDMI Splitter with 4Kx2K & EDID  
Management splits one HDMI signal to two HDMI  
displays at up to 4Kx2K resolution.  
Key Features and Benefits  
Broadcast HDMI video/audio signals from  
one HDMI source to two HDMI displays  
without losing quality  
Supports HDMI Deep Color & 3D  
Supports 1080p and up to 4Kx2K PC  
resolution  
Supports Dolby Digital, DTS-HD and Dolby  
True-HD audio  
Video bandwidth: 340MHz (10.2Gbps)  
Embedded EDID and EDID learning ability  
04-0945A  
Download from Www.Somanuals.com. All Manuals Search And Downloa1d.  
MODE: Selects alternate EDID modes and  
functions. See Mode Dial in page 4 & 5.  
DC 5V: Power adapter jack for the included  
5V power adapter  
SIGNAL  
LED  
POWER  
LED  
Figure 2: Front Panel  
POWER LED: On when the Splitter is  
powered on  
SIGNAL LED: On when HDMI source is  
detected  
HardwareInstallation  
1.  
Power off all devices you plan to connect to  
the Splitter.  
2.  
Connect your HDMI source's HDMI output  
to the Splitter's HDMI IN using an HDMI  
cable (HDMI cable not included).  
Download from Www.Somanuals.com. All Manuals Search And Downloa3d.  
3.  
4.  
ConnectyourHDMIdisplaystotheSplitter's  
HDMI OUT using HDMI cables (HDMI  
cables not included).  
Connect the included power adapter to the  
Splitter's DC 5V power jack and plug it into  
a reliable power outlet.  
5.  
6.  
Power on all of the connected devices.  
The Splitter is now ready to use.  
NOTE: To achieve 3D and 2Kx4K output,  
make sure this standard is supported by  
your display(s), and High Speed HDMI  
cables with Ethernet are used.  
ModeDial  
EDID is used to transmit the make, model and  
characteristics of a monitor to the display adapter  
of the computer. It is also used by an HDTV to  
identify it's maximum resolution to the DVD  
player, A/V receiver or video processor. Use a  
flat head screwdriver to rotate the Mode Dial to  
select amongst the options.  
4
 
0:  
1:  
Firmware update  
EDID Full-HD (1080p@60) - 24bit 2D video  
& 7.1ch audio  
2:  
3:  
EDID Full-HD (1080p@60) - 24bit 2D video  
& 2ch audio  
EDID Full-HD (4K2K@30) - 24bit 2D video  
& 7.1ch audio  
4:  
5:  
EDID Full-HD (4K2K@30) - 24bit 2D video  
EDID HD (1080p@30)(1080i@60)(720p@  
60) - 24bit 2D video & 2ch audio  
Auto EDID mode: Automatically detect  
and analyze the EDID of all the connected  
HDMI displays. The HDMI source player  
will defer to the lowest resolution HDMI  
display  
6:  
7:  
EDID Learning mode: Learns the EDID of  
theHDMIdisplayconnectedtoHDMIOUT  
1 of the Splitter  
Download from Www.Somanuals.com. All Manuals Search And Downloa5d.  
Application  
HDMI source  
3DTV  
3DTV  
* Input length: 5m (Max)  
* Output length: 10m (Max)  
Figure 3: Application  
6
 
TechnicalSupportandWarranty  
QUESTIONS? SIIGs Online Support has answers! Simply visit our web site at  
www.siig.com and click Support. Our online support database is updated daily with  
new drivers and solutions. Answers to your questions could be just a few clicks away.  
You can also submit questions online and a technical support analyst will promptly  
respond.  
SIIG offers a 2-year manufacturer warranty with this product. This warranty covers the  
original purchaser and guarantees the product to be free of any defects in materials or  
workmanship for two (2) years from the date of purchase of the product.  
SIIG will, at our discretion, repair or replace (with an identical product or product  
having similar features and functionality) the product if defective in materials or  
workmanship. This warranty gives you specific legal rights, and you may also have other  
rights which vary from state to state. Please see our web site for more warranty details.  
If you encounter any problems with this product, please follow the procedures below.  
A) If it is within the store's return policy period, please return the product to the store  
where you purchased from.  
B) If your purchase has passed the store's return policy period, please follow the steps  
below to have the product repaired or replaced.  
Step 1: Submit your RMA request.  
Gotowww.siig.com,click Support, thenREQUESTAPRODUCTREPLACEMENT  
to submit a request to SIIG RMA or fax a request to 510-657-5962. Your RMA request  
will be processed, if the product is determined to be defective, an RMA number will  
be issued.  
Step 2: After obtaining an RMA number, ship the product.  
Properly pack the product for shipping. All accessories that came with the  
original package must be included.  
Clearly write your RMA number on the top of the returned package. SIIG will  
refuse to accept any shipping package, and will not be responsible for a product  
returned without an RMA number posted on the outside of the shipping  
carton.  
You are responsible for the cost of shipping to SIIG. Ship the product to the  
followingaddress:  
SIIG, Inc.  
6078 Stewart Avenue  
Fremont, CA 94538-3152, USA  
RMA #:  
SIIG will ship the repaired or replaced product via Ground in the U.S. and  
International Economy outside of the U.S. at no cost to the customer.  
Download from Www.Somanuals.com. All Manuals Search And Downloa7d.  
About SIIG, Inc.  
Founded in 1985, SIIG, Inc. is a leading manufacturer of IT connectivity  
solutions (including Serial ATA and Ultra ATA Controllers, FireWire, USB,  
and legacy I/O adapters) that bridge the connection between Desktop/  
Notebooksystemsandexternalperipherals. SIIGcontinuestogrowbyadding  
A/V and Digital Signage connectivity solutions to our extensive portfolio.  
SIIGproductsoffercomprehensiveusermanuals,manyuser-friendlyfeatures,  
andarebackedbyanextensivemanufacturerwarranty. Highqualitycontrol  
standards are evident by the overall ease of installation and compatibility of  
ourproducts,aswellasoneofthelowestdefectivereturnratesintheindustry.  
SIIG products can be found in computer retail stores, mail order catalogs,  
throughmajordistributors,systemintegrators,andVARsintheAmericasand  
theUK, andthroughe-commercesites.  
PRODUCT NAME  
1 x 2 HDMI Splitter with 4Kx2K & EDID Management  
FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS B  
OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE  
FCCCOMPLIANCESTATEMENT:  
This device complies with part 15 of the FCC Rules. Operation is subject  
to the following two conditions: (1) This device may not cause harmful  
interference, and (2) this device must accept any interference received,  
including interference that may cause undesired operation.  
THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE  
SIIG, Inc.  
6078 Stewart Avenue  
Fremont, CA 94538-3152, USA  
Phone: 510-657-8688  
1x2 HDMI Splitter with 4Kx2K & EDID Management is a trademark of SIIG, Inc. SIIG and  
the SIIG logo are registered trademarks of SIIG, Inc. All other names used in this publication  
are for identification only and may be trademarks of their respective owners.  
March, 2014  
Copyright © 2014 by SIIG, Inc. All rights reserved.  
 

Sharp Flat Panel Television LC 32SB27U User Manual
Sierra Products Outdoor Fireplace UV360FP User Manual
Snapper Lawn Mower 1690170 User Manual
Sonic Impact Technologies CD Player SFT 1 User Manual
Sony Computer Monitor XVM 80 User Manual
Sony Ericsson Computer Drive MD300 User Manual
Sony Home Theater Server PCS TL50 User Manual
Sony Stereo System CDP XA20ES User Manual
Sunfire Work Light HRS SAT4BIP User Manual
Symphonic TV DVD Combo SC724DF User Manual