RCA RP5624 User Manual

English  
FCC Information  
Safety Information  
Important Information  
Make sure that you keep your set  
away from water and high  
For Your Safety  
Ecology  
FCC Information  
Technical Information  
The AC power plug is polarized  
(one blade is wider than the  
other) and only fits into AC  
power outlets one way. If the  
plug will not go into the outlet  
completely, turn the plug over  
and try to insert it the other  
way. If it still does not fit, contact a qualified  
Help protect the environment - we  
recommend that you dispose of used  
batteries by putting them into specially  
designed receptacles.  
This device complies with Part 15 of the FCC  
Product: Clock Radio with CD player  
Brand: RCA  
This Class B digital apparatus complies with  
Canadian ICES-003.  
Cet appareil numérique de la class B est  
conforme à la norme de NMB-003 du Canada.  
temperatures.  
u s e r  
m a n u a l  
Rules. Operation is subject to the following two  
conditions: (1) This device may not cause harmful  
interference, and (2) this device must accept any  
interference received, including interference  
that may cause undesired operation.  
In accordance with FCC requirements, changes  
or modifications not expressly approved by  
Thomson Inc. could void the user’s authority to  
operate this product.  
This device generates and uses radio frequency  
(RF) energy, and if not installed and used  
properly, this equipment may cause interference  
to radio and television reception.  
If this equipment does cause interference to  
radio or television reception (which you can  
determine by unplugging the unit), try to correct  
the interference by one or more of the following  
measures:  
Do not use your System immediately  
after transporting it from a cold place  
to a warm place, as condensation may  
cause the system to malfunction.  
Keep your unit away from humid  
areas and abnormally hot places.  
To prevent personal injury, do not  
reverse any batteries.  
Model: RP5620/RP5624  
Electrical Consumption  
Power Supply: 120V ~ 60Hz  
Maintenance  
Power Consumption: 11 Watts  
Clean the unit with a soft cloth, or a damp  
chamois leather. Never use solvents.  
electrician to change the outlet, or use  
different one. Do not attempt to bypass this  
safety feature.  
a
IMPORTER  
Comercializadora Thomson de México, S.A. de C.V.  
Álvaro Obregón No. 151. Piso 13.  
Col. Roma. Delegación Cuauhtémoc  
C.P. 06700. México, D.F.  
Telefono: 52-55-11-020360  
RFC: CTM-980723-KS5  
The use of apparatus in moderate  
climates.  
Precautions  
For Your Records  
The apparatus shall not be exposed to  
dripping or splashing and that no  
objects filled with liquids, such as  
vases, shall be placed on the  
apparatus.  
No naked flame sources, such as  
lighted candles, should be placed on  
the apparatus.  
Never open the cabinet under any  
circumstances. Any repairs or internal  
adjustments should be made only by a  
trained technician.  
I
n the event that service should be required, you  
may need the model number. In the space  
below, record the date and place of purchase:  
Main plug is used as the disconnect device, it shall  
remain readily operable and should not be  
obstructed during intended used. To be  
completely disconnected the apparatus from  
supply mains, the main plug of the apparatus  
shall be disconnected from the mains socket  
outlet completely.  
Date of Purchase:  
Place of Purchase:  
Warning: Never operate this product with  
the cabinet removed.  
IMPORTADOR  
• Re-orient the receiving antenna (that is, the  
antenna for the radio or television that is  
“receiving” the interference).  
• Move the unit away from the equipment that  
is receiving interference.  
Comercializadora Thomson de México, S.A. de C.V.  
Álvaro Obregón No. 151. Piso 13.  
Col. Roma. Delegación Cuauhtémoc  
C.P. 06700. México, D.F.  
The CD player of this unit uses a laser to  
read the music on the disc. The laser  
mechanism corresponds to the cartridge  
and stylus of a record player. Although  
this product incorporates a laser pick-up  
lens, it is completely safe when operated  
according to directions.  
Attention should be drawn to the  
environmental aspects of battery  
disposal.  
Telefono: 52-55-11-020360  
RFC: CTM-980723-KS5  
Service Information  
• Plug the unit into a different wall outlet so  
that the unit and the equipment receiving  
interference are on different branch circuits.  
If these measures do not eliminate the  
interference, please consult your dealer or an  
experienced radio/television technician for  
additional suggestions. Also, the Federal  
Communications Commission has prepared a  
helpful booklet, “How To Identify and Resolve  
Radio TV Interference Problems.” This booklet  
is available from the U.S. Government Printing  
Office, Washington, DC 20402. Please specify  
stock number 004-000-00345-4 when ordering  
copies.  
This product should be serviced only by those  
specially trained in appropriate servicing  
techniques. For instructions on how to obtain  
service, refer to the warranty included in this  
Guide.  
Minimum distances (2cm) around the  
apparatus for sufficient ventilations.  
The ventilation should not be  
impeded by covering the ventilation  
opening with items, such as  
newspaper, table-cloths, curtains, etc.  
The rating plate is located at the  
bottom cabinet of apparatus.  
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
Discs rotate at high speed inside the  
player. Do not use damaged, warped or  
cracked discs.  
Do not touch the pick-up lens which is  
located inside the disc compartment. Also,  
to keep dust from collecting on the pick-  
up lens, do not leave the compartment  
door open for an extended period of time.  
T H E L I G H T N I N G CAUTION: TO REDUCE THE  
THE EXCLAMATION  
FLASH AND ARROW-  
RISK OF ELECTRIC SHOCK, POINT WITHIN THE  
EXPORTER  
Thomson Inc.  
HEAD WITHIN THE  
DO NOT REMOVE COVER T R I A N G L E I S  
A
TRIANGLE IS  
WA R N I N G S I G N  
ALERTING YOU OF  
A
WARNING  
SIGN  
( O R B A C K ) . N O U S E R -  
SERVICEABLE PARTS IN-  
SIDE. REFER SERVICING  
TO Q U A L I F I E D S E RV I C E  
PERSONNEL.  
ALERTING YOU OF  
P.O. Box 1976  
RP5620  
RP5624  
I
I
M
P
T
O
R
T
T
A
I
N
T
S
"
D
A
N
G
E
R
O
U
S
N
S
R
U
C
O
N
Indianapolis, IN 46206 - 1976  
©2006 Thomson Inc.  
Trademark(s) ® Registered  
Marque(s) ® Deposée(s)  
Marca(s) ® Registrada(s)  
VOLTAGE" INSIDE  
THE PRODUCT.  
A C C O M PA N Y I N G  
T
H
E
P
R
O
D
U
C
T.  
SEE MARKING ON BOTTOM / BACK OF PRODUCT  
WARNING:TO PREVENT FIRE OR ELECTRICAL  
DO NOT EXPOSETHIS PRODUCT  
EN/E  
The descriptions and characteristics in this owner’s manual are for the purpose of general reference only and not  
as a guarantee. In order to provide you with the highest quality product, we may make changes or modifications  
without prior notice. The English version serves as the final reference on all product and operational details  
should any discrepancies arise in other languages.  
SHOCK HAZARD,  
TO RAIN OR MOISTURE.  
Printed in China / Impreso en China  
This product complies with DHHS rules 21CFR  
subchapter J. appliable at date of manufacture.  
It is important to read this instruction book prior to using your new product for the first time.  
Es importante leer este manual antes de usar por vez primera su euipo.  
5632 634B (EN/E)  
Clock  
General Controls  
Clock  
Before You Begin  
General Controls  
US Time Zones  
OPEN/CLOSE  
Before You Plug for Power  
1. Be sure Time Zone and Daylight Saving  
Time is adjusted before operating the  
clock.  
2. Rotate the SELECTION KNOB to the  
CLOCK position, the clock setting icon  
displayed.  
3. Press or to set the time. Press and hold  
the respective buttons to fast reverse or  
fast forward clock time.  
4. Rotate the SELECTION KNOB to the LOCK  
position to save the clock time.  
Plugging In For Power  
AC OUTLET POWER SUPPLY:  
120V~60Hz  
Front View  
SELECTION KNOB  
Top View  
Note:  
OPEN / CLOSE - opens / closes the CD  
compartment.  
SNOOZE - turns off the alarm momentarily.  
NAP - sets the alarm to sound after a specific  
period of time. (Alarm tone only)  
- activates SLEEP function.  
1. Setting Time Zone  
Power is fed to the unit even  
You may slide the time zone selector at  
the bottom of the unit to 1) Eastern,  
2) Central, 3) Mountain or 4) Pacific. (refer  
to the maps on the right)  
- skips / searches backward.  
- starts / pauses CD playback.  
- skips / searches forward.  
- stops CD playback.  
WAKE UP CD TRACK - selects the wake up CD  
track.  
CD MODE - selects repeat 1 / repeat all / shuffle /  
repeat shuffle in CD mode.  
OFF - turns off the radio / alarm / CD.  
DISPLAY - selects display mode.  
AUDIO IN - selects auxiliary audio input source.  
RADIO ON - turns on the radio.  
when it is not functioning. To cut  
is  
the power supply off, the power cable  
must be unplugged.  
Battery Back-Up Operation  
/
- change time / radio frequency / CD track  
This clock radio is equipped with a  
memory holding system that can be  
powered with 2 “AA” batteries (included  
and installed). The power failure  
SELECTION KNOB - Rotate until the indicator  
points to your selected mode. The options are as  
follow (left to right):  
WAKE TIME 1 - adjusts wake time 1.  
WAKE TIME 2 - adjusts wake time 2.  
CLOCK - adjusts clock time.  
LOCK - no adjustment can be made when in lock  
mode.  
WAKE MODE 1 - change WAKE 1 mode.  
WAKE MODE 2 - change WAKE 2 mode.  
COLOR SELECT - adjusts the display color.  
2. Day Light Saving  
You can press and hold the day light  
saving button at the bottom of the unit to  
turn on/ off in areas observing/ not  
observing such time change.  
Power Failure Indicator  
When AC power is interrupted (disconnected)  
for a short period of time, both time and  
alarm settings will change (unless battery is  
installed). After AC power is restored  
protection circuit will not operate unless  
battery is installed. When normal  
household power is interrupted, or AC line  
cord is unplugged, the batteries will  
power the clock radio to keep track of  
time and alarm settings programmed into  
memory. When the battery backup  
functions, the digital display will not light,  
however, the function of alarm still occurs  
during the power interruption if  
remaining battery power is adequate.  
Normal operation will resume after AC  
power is restored so you will not have to  
reset the time or the alarm.  
WARNING: Please avoid playing with  
these buttons after entering the  
Clock/Alarm set mode.  
Display  
Selecting between Analogue  
(reconnected), the Digital Display will blink to  
indicate that power was interrupted and you  
should readjust the time and alarm settings.  
SELECTION KNOB  
Auto Clock Set  
Side Views  
and Digital Clock Display  
You do not have to set the clock time as a  
built-in automatic time set system is  
equipped in this clock powered by 3V (2  
X AA batteries (included). All you have to  
do is to plug this clock for power and  
current time will be shown automatically.  
However, the batteries can also be  
exhausted and we recommend that you  
replace the batteries every 2-3 years.  
Canadian Time Zones  
TUNING - adjusts radio frequency.  
+ Volume – - adjusts volume.  
AUDIO IN - Auxiliary audio input jack.  
Press DISPLAY to select between analgoue  
and digital clock display. On analogue clock,  
you can turn on or off the second arm by the  
second arm switch at the bottom.  
Back View  
BAND - selects radio band (AM or FM).  
BRIGHTNESS - adjusts display brightness (high or  
low).  
Display Brightness  
Replace batteries as follow:  
Clock time and radio frequency are display on  
the display area at the front of the unit. You  
can adjust the brightness of the display by  
sliding BRIGHTNESS/LO••HI at the back of  
the unit.  
1. Remove battery compartment door  
(located at the bottom of the radio)  
by applying thumb pressure to the  
tab on battery door and then lift the  
door out and off the cabinet.  
Setting Clock  
This unit has a built-in automatic time set  
system that automatically generates the  
correct clock time once the unit is plugged  
in. You are not required to set the clock  
manually, however, in case the memory  
holding batteries are accidentally  
removed, you may set the clock manually  
with following procedures:  
Bottom View  
2. Replace 2 AA batteries.  
3. Replace the compartment door.  
Display Color  
Time zone selector (1,2,3,4) - selects time zone.  
DAYLIGHT SAVING TIME - selects day light  
saving time on or off.  
1. Rotate the SELECTION KNOB to the  
COLOR SELECT position  
Note: we recommend that you replace the  
batteries every 2-3 years.  
2. Press or to select the display color.  
SECOND ARM - selects second arm on or off on  
the analogue clock display.  
incorporated into other products.  
• Products purchased or serviced outside the USA.  
• Acts of nature, such as but not limited to lightning  
damage.  
Limitation of Warranty:  
THE WARRANTY STATED ABOVE IS THE ONLY  
WARRANTY APPLICABLE TO THIS PRODUCT. ALL  
OTHER WARRANTIES, EXPRESS OR IMPLIED  
Limited Warranty (United  
States)  
Radio & CD Player  
NAP Function  
Wake Function  
Wake Function  
What your warranty covers:  
• Defects in materials or workmanship.  
For how long after your purchase:  
• One year from date of purchase.  
For catnaps up to 2 hours without  
disturbing the regular alarm settings, the  
NAP function wakes you up after a short  
period of time. Simply:  
3. Press NAP once to show time left, after 3  
seconds, the display will return to clock  
time.  
Setting the Wake Time  
Waking to CD or Radio  
Switching on Radio  
Listening to Compact Disc  
Tip:  
1. Rotate the SELECTION KNOB to the  
WAKE TIME 1 or WAKE TIME 2 position  
1. Set the wake time.  
Press RADIO ON at the front of the unit.  
1. Open the CD compartment.  
2. Insert a disc and close the CD  
compartment door.  
Note:  
The warranty period for rental units begins with  
2. Rotate the SELECTION KNOB to the  
WAKE MODE 1 or WAKE MODE 2  
position, press or to select waking up  
If you set the Wake function  
with low volume level before  
going to bed, we advise using Waking  
to Alarm Tone mode to wake you up  
since the volume will automatically  
increase.  
Only alarm tone can be selected in NAP  
mode.  
Please make sure the SELECTION  
(INCLUDING ALL IMPLIED WARRANTIES OF  
MERCHANTABILITY OR FITNESS FOR  
PARTICULAR PURPOSE) ARE HEREBY  
DISCLAIMED. NO VERBAL OR WRITTEN  
INFORMATION GIVEN BY THOMSON INC., ITS  
the first rental or 45 days from date of shipment to  
the rental firm, whichever comes first.  
What we will do:  
• Provide you with a new, or at our option, a  
refurbished unit. The exchange unit is under  
warranty for the remainder of the original  
product’s warranty period.  
• Proof of purchase in the form of a bill of sale or  
receipted invoice which is evidence that the  
product is within the warranty period must be  
presented to obtain warranty service. For rental  
firms, proof of first rental is also required.  
How to make a warranty claim:  
• Properly pack your unit. Include any cables, etc.,  
which were originally provided with the product.  
We recommend using the original carton and  
packing materials.  
WAKE 1  
WAKE 2  
until  
or  
icon shows on the  
1. Press NAP, the NAP indicator will  
flash. While the NAP indicator is  
flashing, press or to adjust nap  
time. The time range is from 10  
minutes to 2 hours at 10 minutes  
interval (default is 20 minutes).  
2. Wait 3 seconds or press NAP again to  
confirm, the NAP indicator will show  
on the display.  
Switching Band  
A
KNOB position is set to LOCK  
display.  
3. Press  
4. Press  
.
or  
Slide the BAND switch on the side of the  
after making changes.  
2. Press or to set the wake time. The  
time decrements or increments will  
follow by a faster rate when you press  
to skip backward or  
by CD (  
/
) or by RADIO (  
/
) with  
unit to select FM or AM band.  
Stopping/ Canceling NAP Alarm  
forward the CD track.  
5. Press and hold or  
backward or forward within the CD track.  
corresponding icons light accordingly.  
When the NAP alarm sounds, you can  
press OFF to stop it.  
AGENTS OR EMPLOYEES SHALL CREATE  
A
to search  
Tuning the Radio  
and hold either or  
.
For Waking to CD  
GUARANTY OR IN ANY WAY INCREASE THE  
SCOPE OF THIS WARRANTY.  
Press and hold NAP for 3-5 seconds to  
cancel the NAP setting.  
Turn the TUNING knob on the left of the  
3. Rotate the SELECTION KNOB to the  
LOCK position to save the wake time  
setting.  
3. Press  
to turn on the CD.  
6. Press  
to stop CD playback.  
unit to adjust radio frequency.  
REPAIR OR REPLACEMENT AS PROVIDED  
UNDER THIS WARRANTY IS THE EXCLUSIVE  
REMEDY OF THE CONSUMER. THOMSON INC.  
SHALL NOT BE LIABLE FOR INCIDENTAL OR  
CONSEQUENTIAL DAMAGES RESULTING FROM  
THE USE OF THIS PRODUCT OR ARISING OUT OF  
ANY BREACH OF ANY EXPRESS OR IMPLIED  
4. While pressing WAKE UP CD TRACK,  
press or to select your desired CD  
wake up track.  
SmartSnoozeTM Operation  
Selecting CD Play Mode  
Turning off Wake Function  
FM Antenna  
1. Start CD playback.  
This operation allows extra sleep time  
1. Silence the wake function  
momentarily  
Selecting Wake Mode  
5. Release WAKE UP CD TRACK, and the CD  
wake up track is set.  
The FM antenna cord is attached at the  
back of the unit. We recommend the cord  
be fully extended for best FM reception.  
Built-In AFC  
2. Press CD MODE repeatedly to select a  
playback mode. Corresponding icon shows  
on the display.  
after the wake function is on. The alarm  
will be off by pressing SNOOZE, NAP,  
or until the snooze period is over.  
Snooze function can be used repeatedly  
up to 30 minutes (default: 9 minutes).  
To change to another wake mode (e.g.  
from CD to radio):  
Sleep Function  
In sleep mode, the radio and CD will turn  
off automatically. To set the sleep time,  
,
Press SNOOZE. The alarm will sound again  
when the snooze period is over. (see  
SmartSnoozeTM Operation” section).  
To reset the CD wake up track, follow the  
above procedures.  
1. Rotate the SELECTION KNOB to the  
WAKE MODE 1 or WAKE MODE 2  
position  
WARRANTY ON THIS PRODUCT.  
THIS  
• Include evidence of purchase date such as the bill  
of sale. Also print your name and address and a  
description of the defect. Send via standard UPS  
or its equivalent to:  
Sleep to CD  
6. Rotate VOLUME to adjust to your desired  
wake up volume.  
7. Press OFF to stop the CD playback.  
The Built In Automatic Frequency Control  
(AFC) works only on FM. It helps reducing  
drift on FM reception and keeping the  
radio locked in on the FM station to which  
it is tuned.  
DISCLAIMER OF WARRANTIES AND LIMITED  
WARRANTY ARE GOVERNED BY THE LAWS OF  
THE STATE OF INDIANA. EXCEPT TO THE EXTENT  
PROHIBITED BY APPLICABLE LAW, ANY IMPLIED  
WARRANTY OF MERCHANTABILITY OR FITNESS  
FOR A PARTICULAR PURPOSE ON THIS PRODUCT  
IS LIMITED TO THE APPLICABLE WARRANTY  
PERIOD SET FORTH ABOVE.  
- repeats the current track.  
- repeats the whole disc.  
- plays tracks randomly.  
Under sleep mode, press  
to start CD  
playback. CD play mode will be automatically  
in Repeat All mode when using Sleep to CD  
setting. The unit will turn off automatically  
once the sleep time is reached.  
After this, the wake function will turn off  
until the next day.  
Set the “quiet” period as follow:  
2. Stop the wake function  
Press OFF and the alarm will be on again the  
following day at the same time.  
simply:  
2. Press or to scroll through wake  
1. Press , then the time display will  
exhibit 0:59 and the radio will turn on  
(default). While holding , press or  
to set the sleep time. The time  
range is from 1 minute to 2 hours  
(default is 0:59).  
If the CD compartment is empty, the alarm  
tone will sound instead even the WAKE  
TO CD mode is selected.  
Thomson Inc.  
Product Exchange Center  
11721 B Alameda Avenue  
Socorro, Texas 79927  
options.  
.
- plays random track repeatedly.  
When tuning in FM stations, you may  
notice that the station you are tuning can  
be well-tuned on two or three nearby  
points on the dial. Always tune carefully  
at the loudest and clearest point.  
1. Press and hold SNOOZE.  
3. Disable the wake function  
permanently  
Listening to Auxiliary Source  
• Insure your shipment for of loss or damage.  
Thomson accepts no liability in case of damage or  
loss en route to Thomson.  
• Pay any charges billed to you by the Exchange  
Center for service not covered by the warranty.  
• A new or refurbished unit will be shipped to you  
freight prepaid.  
What your warranty does not cover:  
• Customer instruction. (Your Owner’s Manual  
provides information regarding operating  
Instructions and user controls. For additional  
information, ask your dealer.)  
Waking to Alarm Tone  
When waking to alarm tone is selected,  
2. Press or  
to set the quiet period.  
1. Connect auxiliary input source (e.g. mp3  
player) with an auible cable (not included)  
to the AUDIO IN jack of the unit.  
For Waking to Radio  
How state law relates to this warranty:  
The time decrements or increments will  
follow by a faster rate when you press  
and hold the buttons.  
1. Rotate the SELECTION KNOB to the  
WAKE MODE 1 or WAKE MODE 2  
position.  
2. Press or until all wake indicator  
disappear.  
3. Press RADIO ON to turn on the radio.  
4. Rotate TUNING to select a waking up  
radio station.  
Some states do not allow the exclusion nor  
2. Release  
and the current time will be  
/
icon will light. You cannot adjust the  
Note:  
limitation of incidental or consequential damages,  
or limitations on how long an implied warranty lasts,  
so the above limitations or exclusions may not apply  
to you.  
• This warranty gives you specific legal rights, and  
you also may have other rights that vary from state  
to state.  
If you purchased your product outside the USA:  
This warranty does not apply. Contact your dealer  
for warranty information.  
shown again,  
will show on the  
2. Press AUDIO IN to select auxiliary input  
mode with AUX shows on the display.  
3. Adjust volume by rotating + VOLUME -,  
control other playback operations on the  
auxiliary unit.  
alarm tone with volume.  
SmartSnoozeTM is only available when  
the SELECTION KNOB is at the LOCK  
position.  
display, and the sleep time is set.  
Press SLEEP in sleep mode to read the  
remaining sleep time.  
• The unit will enter either CD or  
Radio mode after SLEEP is  
pressed, depending on the previous sleep  
setting.  
When the AC power is disconnected,  
the unit will enter DC backup mode, all  
wake mode will be reverted to alarm  
tone.  
The unit equips with GRAD-U-WAKE  
feature, the alarm tone volume will  
increase gradually to its maximum in  
about 30 to 45 seconds.  
5. Rotate VOLUME to adjust to your  
desired wake up volume.  
6. Press OFF to turn off the radio.  
AM Antenna  
A built-in ferrite rod antenna eliminates  
the need for an outside antenna for AM  
reception. Rotating the unit slightly may  
improve reception of distant AM stations.  
• If you decide to turn off the unit  
sooner, press SNOOZE or OFF.  
Sleep to Radio  
Under sleep mode, press RADIO ON to  
turn on the radio and select the radio  
station as usual. Once the sleep time is  
reached, the radio will turn off  
• Installation and set-up service adjustments.  
• Batteries.  
• Damage from misuse or neglect.  
• When the sleep mode is activated again,  
the sleep time will be the same as the one  
you have set before.  
• Products which have been modified or  

Toshiba MK4018GAP User Manual
Sylvania NB500SL9 User Manual
Samsung SGH i320 User Manual
Samsung SGH C140 User Manual
Samsung GH68 26097A User Manual
Samsung Cell Phone GH68 2863 User Manual
Philips SHOCKPROOF AZ9002 User Manual
Philips Docking Entertainment System DC6210 User Manual
Philips AX5006 User Manual
Nokia XPRESS ON 3125 User Manual