Silvercrest Food Processor SAS 150 A1 User Manual

Electric Multi-Purpose Slicer SAS 150 A1  
Electric Multi-Purpose Slicer  
Operation and Safety Notes  
6
 
1
2
13  
12  
4
3
11  
5
6
10  
9
17  
8
7
A
D
B
C
9
14  
2 x  
15  
16 a  
16  
E
F
19  
18  
 
 
Table of contents  
Introduction  
Dear Customer, .............................................................................................................Page  
Intended usage .............................................................................................................Page  
Items supplied................................................................................................................Page  
Features .........................................................................................................................Page  
Technical data...............................................................................................................Page  
6
6
6
6
7
Safety  
Important safety instructions.........................................................................................Page  
7
Before the First Usage  
First steps .......................................................................................................................Page  
Setting up the appliance...............................................................................................Page  
Adjust the infinite slice-thickness setting (see Fig. D)...................................................Page  
8
8
8
Operation  
Working advice.............................................................................................................Page  
Selecting mode of operation........................................................................................Page  
Setting the Vario-switch cutting blade speed...............................................................Page  
Slice thickness - setting and cutting ..............................................................................Page  
8
9
9
9
Cleaning and maintenance  
Cleaning........................................................................................................................Page 10  
Maintenance/Removing/assembling the cutting blade...........................................Page 10  
Special accessories.......................................................................................................Page 10  
Warranty/Customer Service...................................................................Page 11  
Disposal......................................................................................................................Page 11  
Declaration of Conformit/Manufacturer.......................................Page 11  
GB/IE  
5
 
Introduction  
The following pictograms are used in these operating instructions/on the device:  
Read instruction manual!  
Watts (Effective power)  
W
Keep children away from electrical  
devices!  
Observe caution and safety notes!  
Damaged appliances, power cables  
and power plugs mean potentially fatal  
risks from electric shock. Regularly  
check the condition of the appliance,  
the power cables and the power plugs.  
Cautionelectric shock!  
Danger to life!  
Dispose packaging and appliance in  
an environmentally-friendly way!  
Proper procedure and handling.  
Voltage  
V
~
Electric Multi-Purpose Slicer  
SAS 150 A1  
use of the appliance or are caused by incorrect  
operation of it.  
Not for commercial use.  
Introduction  
Items supplied  
Dear Customer,  
Directly after unpacking the appliance check it to  
before using the electric Multi-Purpose Slic- ensure that all components are available and that  
er for the first time please read carefully  
and thoroughly through these operating  
there are no signs of visible damage.  
instructions and the safety advice, completely famil-  
iarising yourself with the appliance. You may find it  
useful to open out the page illustrating the slicer and  
describing both it and its operation. Retain these in-  
structions for future reference and pass them on to  
whoever might acquire the appliance at a future date.  
1
1
1
1
1
1
Electric Multi-Purpose Slicer SAS 150 A1  
Cleaning brush  
Food holder plate  
Slice tray  
Screw helper and 2 spare adjustment screws  
Operating instructions  
Intended usage  
Features  
1
2
3
4
5
6
7
8
This appliance is intended exclusively for slicing  
normal household foodstuffs. The food to be sliced  
must be thawed, unpacked and free from bones  
before it can be sliced with the appliance.  
All other uses, and modifications to the appliance,  
are deemed to be improper usage and may result  
in serious physical injury. The manufacturer accepts  
no liability for damages that result from improper  
Blade protector  
Vario-switch for blade speed  
Switch for intermittent/continuous operation  
Knob for unlocking the blade covering  
Appliance housing  
Blade cover  
Cable winder/Cable depot  
Power cable  
6
GB/IE  
 
Introduction/Safety  
9
Supporting table with guide slot  
Foodstuff carriage  
Food holder plate with finger guard  
Cutting blade  
Food support plate  
Regulator (Infinite control slice-thickness  
controller) (Fig. C)  
Screw helper  
Adjustment screws  
Spare adjustment screws  
Slice/catch tray  
Screw-clip for blade disassembly (Fig. E)  
Cleaning brush (Fig. F)  
Afterwards, have the slicer examined by an au-  
thorised service centre before you use it again.  
10  
11  
12  
13  
14  
8
In the event of damage to the power cable  
,
the repair may only be carried out by the manu-  
facturer, his service centre or a suitably qualified  
specialist.  
15  
16  
16a  
17  
18  
19  
To avoid physical injuries:  
Do not use the electric Multi-Purpose Slicer if  
your hands are wet or you are standing on a  
wet floor. Do not use the slicer if it is wet or moist.  
The appliance may not be used outdoors.  
Set up and store the electric Multi-  
Technical data  
Purpose Slicer out of reach of children.  
Nominal voltage:  
Nominal power:  
Continuous operation  
time:  
230V 50Hz  
~
This device is not intended to be used by persons  
(including children) with restricted physical,  
sensory or mental abilities or with insufficient  
experience and/or knowledge, unless they  
are supervised by a person who is responsible  
for their safety or they have received instruction  
on how to use the device from such a responsi-  
ble person. Children should be supervised in  
order to ensure that they do not play with the  
device.  
150W  
COT = 10 Minutes  
reinforced, non-rusting  
serrated blade, 17cm  
Cutting blade:  
Safety  
Do not leave the electric Multi-Purpose Slicer  
unattended if it is ready for immediate use.  
Important safety  
instructions  
Tips for personal safety  
To avoid potentially fatal  
electric shocks:  
The electric Multi-Purpose Slicer is intended  
exclusively for domestic use and not for com-  
mercial purposes.  
Always ensure that the slicer is safely set up or  
installed before you take it into use.  
The electric Multi-Purpose Slicer may only be  
connected to a 230V AC electricity supply.  
Always remove the plug from the  
power socket before you clean the  
slicer, if it malfunctions and when  
you have finished using it. To disconnect the  
appliance from the electricity supply never pull  
the plug out by using the power cable , always  
This appliance should always be used with the  
10  
11  
food carriage  
and the food holder plate  
.
Exceptions are possible, if for example the size  
and shape of the food to be sliced does not  
permit the use of these devices. Do not use the  
appliance to cut bones or deep-frozen food.  
Do not use the appliance if it is damaged in  
any way. Promptly arrange to have the appli-  
ance repaired at an authorised service centre  
or by an other suitably qualified specialist.  
8
pull directly on the plug itself.  
Never submerse the appliance in water and do  
not expose it to rain or moisture. Should the ap-  
pliance fall into water, First remove the plug  
from the socket and then remove the appliance  
from the water.  
GB/IE  
7
 
Safety/Before the First Usage/Operation  
17  
Use the appliance with the supplied accesso-  
ries only. No claims under the warranty nor a  
liability for damages will be accepted if they re-  
sult from improper or incorrect use of the slicer.  
Place the catch tray  
below the support  
9
table  
and on the housing such that the  
sliced foods can fall in there directly and with-  
out hindrance after being cut.  
Before the First Usage  
First steps  
Adjust the infinite slice-thick-  
ness setting (see Fig. D)  
Through variable tightenings of the adjusting  
16  
Carefully remove the electric Multi-Purpose  
Slicer from its packaging, remove all packag-  
ing materials and keep them together with the  
main packaging.  
Clean the electric Multi-Purpose Slicer before it  
comes into contact with any foodstuffs (see also  
the chapter ‘Cleaning’).  
screws  
of the infinite slice-thickness setting  
you can determine the movement rate  
14  
.
16  
tight  
Screw both of the adjusting screws  
with the screwdriver  
Check, by turning the infinite slice-thickness  
control knob , to see if the desired movement  
15  
.
14  
rate is suitable.  
If it is not,  
16  
Setting up the appliance  
- loosen both adjusting screws  
movement rate or  
for a lighter  
further for a  
16  
Specific safety advice on the  
placing of the appliance  
- tighten both adjusting screws  
stiffer movement rate.  
1. Never set the electric Multi-Purpose Slicer up  
on a hot surface or near an open flame.  
Operation  
8
2. Ensure that the power cable  
does not pass  
over hot or sharp-edged objects.  
Working advice  
8
3. Do not allow the power cable  
to become  
Specific safety advice for  
slicing and for the handling of  
the appliance  
kinked or trapped and do not wrap it around  
the electric Multi-Purpose Slicer.  
12  
when the slic-  
Set the electric Multi-Purpose Slicer up on a  
flat, non-slip surface close to a power socket.  
1. Never touch the cuttingblade  
er is in operation!  
8
Unwind the required length of power cable  
Insert the plug into the power socket.  
.
There is a risk of grave personal injury!  
10  
2. Always use the food carriage  
and the food  
10  
11  
Place the food carriage  
on the supporting  
(see Fig. B). Now  
holder plate  
.
9
table with guide slot  
press the on the blade cover  
side down, so that the holding clamps (on the  
(Exception: very large pieces of foodstuff).  
Press the pieces of food to be sliced forward  
6
high standing  
11  
using the food holder  
.
10  
underside of the food carriage ) engage. En-  
sure that these have correctly engaged, in that  
you check the mobility of the food carriage. Pull  
3. Use the slicer only for cutting normal house-  
hold foods and not for other purposes. Do not  
use the slicer for cutting deep-frozen foods,  
bones, foods with large kernels or for the  
slicing of still packaged foods.  
10  
to the front for removal of the food carriage  
9
from the guide slot  
and lift it from the sup-  
9
port table  
.
4. Never use the slicer continuously for more than  
10 minutes .  
11  
Push the food holder plate  
on to the food  
10  
carriage  
.
8
GB/IE  
 
Operation  
12  
5. The cutting blade  
continues to rotate for a  
Setting the Vario-switch  
cutting blade speed  
short while after the slicer has been switched off.  
6. For reasons of safety, the slice thickness must  
be returned to the „0“ setting after use.  
Low revolutions/Revolution symbol  
narrow end:  
Soft foodstuffs:  
Set a low revolution speed when you want to  
10  
2
Direct the food carriage  
slowly against the  
cut soft foodstuffs.Push the Vario-switch  
completely in the direction of the sharp end.  
12  
cutter . Soft foodstuffs, for example hams or  
cheeses, are best cut when they are at a low  
temperature/lightly chilled.  
High revolutions/Revolution symbol  
wide end:  
Hard foodstuffs:  
Use a high revolution speed for slicing hard  
2
With hard foodstuffs you can direct the food car-  
foodstuffs. Push the Vario-switch  
in the direction of the broad end.  
completely  
10  
12  
riage  
somewhat faster against the cutter  
.
You can thus quickly prepare your required  
amount of of sliced foods, for example salami,  
bread or gherkins.  
Note: Between the maximum and minimum  
adjustments you can naturally also carry out  
further individual settings. Practice appropriate  
trial slicings.  
Selecting mode of operation  
Note:  
Slice thickness - setting  
and cutting  
The two operating modes can be switched on  
and off with the rocker switch for intermittent/  
3
continuous operation  
.
Set the required slice thickness using the control  
14  
knob  
(see Figure C). The settings on the scale  
Continuous operation/max. 10 minutes  
(switch in position „I“):  
do not correspond with the slice thickness in mm.  
12  
For safety reasons the cuttingblade  
is covered  
Set the switch for intermittent/continuous oper- in setting „0“.  
3
12  
ation  
to position „I“. The cutting blade  
runs without it being necessary to hold the switch  
in this position.  
Place the food to be sliced on the food  
10  
carriage  
.
Halting continuous operation: Move the switch  
If necessary, press the food to be sliced with  
3
11  
lightly against the  
for intermittent/continuous operation  
into  
the food holder plate  
13  
the „0“ position and wait until the cutting blade  
comes to a complete standstill.  
food support  
.
Switch the appliance on and, whilst lightly  
pressing the food to be sliced forward, guide  
12  
it along the cutting blade . After using the  
Intermittent operation (switch for  
intermittent/continuous operation  
in position „II“):  
13  
slicer always set the food support plate  
into  
the „0“ setting so that the sharp blade is covered.  
12  
is ideally suitable for cut-  
ting wafer-thin slices of cold cuts or boiled ham  
(see Fig. A).  
The cutting blade  
To safeguard your fingers always use the food  
10  
11  
carriage  
and the food holder plate  
(Ex-  
ception: slicing very large pieces of foodstuffs).  
3
uous operation  
and wait until the cutting  
blade comes to a complete standstill.  
GB/IE  
9
 
Cleaning and maintenance  
Cleaning and maintenance  
Maintenance/Removing/  
assembling the cutting blade  
Cleaning  
Important safety notices for  
the removal and assembly of  
the cutting blade!  
Important safety advice for  
cleaning the slicer  
1. Switch the slicer off, remove the plug from the  
13  
1. Before starting to clean the electric Multi-Pur-  
pose Slicer; switch it off, remove the power ca-  
power socket and set the food support plate  
into position „0“.  
8
ble  
support plate  
from the mains socket and set the food  
2.  
ATTENTION! RISK OF PERSONAL  
13  
12  
is very sharp!  
into the „0“ setting.  
INJURY! The cutting blade  
2. Do not submerse the electric Multi-Purpose  
Slicer in water.  
For the removal and assembly wear appropriate  
safety gloves. Otherwise, you could receive cut  
injuries.  
3.  
ATTENTION! RISK OF SERIOUS  
12  
INJURY: The cutting blade  
is very sharp!  
6
Open the blade cover  
by pressing the  
4
blade cover unlock button . Remove the  
6
Accessories suitable  
for dishwashers!  
blade cover  
.
18  
Remove the plastic screw clip  
from the  
mounting (see Fig. E) and screw the blade lock  
12  
10  
Clean the food carriage , the food holder  
of the cutting blade  
the left.  
out by unscrewing it to  
12  
11  
12  
and the slice  
plate , the cutting blade  
17  
tray  
in the dishwasher.  
When taking out the blade  
you grasp it at its centre.  
make sure that  
It is necessary to clean the electric Multi-Pur-  
pose Slicer thoroughly at regular intervals as  
perishable food scraps could accumulate on  
the appliance or behind the cutting blade  
Clean all appliance parts not suitable for the  
dishwasher with a lightly moistened cloth.  
12  
The cutting blade  
dishwasher.  
can be cleaned in the  
12  
12  
.
Clean the housing behind the cuttingblade  
with a dry cloth or a soft brush.  
12  
Re-assemble the cutting blade  
in a reverse  
5
Wipe off the appliance housing , the cutting  
blade covering , the support table with  
sequence of the above instructions.  
Due to the special sawtoothing and the high  
6
9
13  
12  
guide slots  
and the food support plate  
quality, the cutting blade will retain its  
carefully. Do not use abrasive cleaning agents,  
sponges with rough surfaces or hard brushes.  
sharpness for a very long time. A resharpening  
of the cutting blade is not necessary. Consult  
the service centre for your country if you have  
12  
Cleaning brush:  
questions about the cutting blade  
.
ATTENTION! RISK OF PERSONAL INJU-  
RY! Carry out all tasks using the cleaning brush  
19  
(see Fig. F) with great care. Should it slip  
Special accessories  
12  
close to the cutting blade , there is the risk  
of receiving a severe personal injury.  
Use the bristles of the cleaning brush  
Round cutter:  
An untoothed cutting blade, specifically for the  
move remnants such as crumbs from all difficult finest of slices, is also available.  
19  
to re-  
to reach positions. The flattened end can be  
excellently used to remove stubborn soiling.  
Orders for special accessories are be directed to  
the service centre for your country.  
10 GB/IE  
 
Warranty/Customer Service/Disposal/Declaration of Conformit/Manufacturer  
Warranty/Customer Service  
Disposal  
The warranty for this appliance is for 3  
years from the date of purchase. The ap-  
pliance has been manufactured with care  
and meticulously examined before deliv-  
ery. Please retain your receipt as proof  
of purchase. In the event of a warranty  
claim, please make contact by telephone  
with our Service Department. Only in this  
way can a post-free despatch for your  
goods be assured.  
The packaging is wholly composed of  
environmentally-friendly materials that  
can be disposed of at a local recycling  
centre.  
Do not dispose of electric equip-  
ment in the household waste!  
According to the European Directive 2002/96/EC  
regarding used electrcial and electronic appliances  
and its implementation in national law, used electri-  
cal equipment must be separately collected and  
disposed of at an approved recycling facility.  
The warranty covers only claims for material and  
maufacturing defects, but not for transport damage,  
for wearing parts or for damage to fragile compo-  
nents, e.g. buttons or batteries. This product is for  
To dispose of electrical appliances that you no  
private use only and is not intended for commercial longer require, please consult your local authorities  
use.  
or city administration.  
The warranty is void in the case of abusive and im-  
proper handling, use of force and internal tamper-  
ing not carried out by our authorized service branch.  
Your statutory rights are not restricted in any way  
by this warranty.  
Declaration of Conformit/  
Manufacturer  
This product complies with the requirements of the  
valid European and national Directives (Low Voltage  
Directive 2006/95/EC, Electromagnetic Compati-  
bility 2004/108/EC). Conformity has been verified.  
The corresponding declarations and documents  
are retained by the manufacturer.  
The warranty period will not be extended by repairs  
made unter warranty. This applies also to replaced  
and repaired parts. Any damage and defects extant  
on purchase must be reported immediately after  
unpacking the appliance, at the latest, two days after  
the purchase date. Repairs made after the expiration Kompernaß GmbH  
of the warranty period are subject to payment.  
Burgstraße 21  
D-44867 Bochum  
GB  
DES UK LTD  
Tel.:  
0871 5000 700 (£ 0.10 / minute)  
Subject to technical alterations.  
IE  
Kompernass Service Ireland  
Tel:  
1850 930 412 (0,082 EUR/Min.)  
Standard call rates apply.  
Mobile operators may vary.  
GB/IE 11  
 
IAN 61458  
KOMPERNASS GMBH  
Burgstraße 21  
D-44867 Bochum  
© by ORFGEN Marketing  
Last Information Update: 12/2010  
Ident.-No.: SAS150A1122010-6  
6
 

Sharp CRT Television 36C530 User Manual
Sharp Microwave Oven R 1520L User Manual
Sharp Projector XV Z30000 User Manual
Sonance Speaker System VP67 LCR User Manual
Sony Car Stereo System 757MX User Manual
Sony Cassette Player TCD D100 User Manual
Sony Portable Radio ICF 1000L User Manual
SOYO Computer Hardware SY 6VZA User Manual
Stanton CD Player S 450 User Manual
Summer Infant Thermometer Ear Thermometer User Manual