SIIG Stereo Receiver CAT5 5e 6 User Manual

VGA & Audio Receiver  
Quick Installation Guide  
Introducing the VGA & Audio Receiver  
The VGA & Audio Receiver receives VGA video and stereo  
audio transmissions from a transmitter over one  
economical CAT5e cable.  
FeaturesandBenefits  
ReceivesVGAvideoandstereoaudiotransmission  
over one economical CAT5/5e/6 cable  
Support 2-channel stereo audio  
SupportsVGA,SVGA,XGA.SXGAandMulti-sync  
monitors  
Distance: up to 1080ft (330m) @ 800x600 resolution  
Resolution: up to 1920 x 1200 @ 246ft (75m)  
PackageContents  
VGA & Audio Receiver  
Power adapter (5V DC)  
QuickInstallationGuide  
Serial Number Sticker  
For future product return or exchange this serial number  
is needed. Please keep it for your reference.  
04-0547B  
1
 
Hardware Installation  
UsehighqualityCAT5e/6cabletoensurethebestpossible  
display quality up to the maximum supported distance.  
1.  
Connect one end of a CAT5e/6 cable to the VGA +  
Audio Input and the other end to an RJ45 port on  
the transmitter.  
2.  
3.  
4.  
Connect the VGA Out to your VGA display.  
Connect your speakers to the Speaker Jack.  
Insert one end of the power adapter into the Power  
Connector, then plug the other end into a reliable  
power source. Power on all devices.  
Important: ThisVGA&AudioReceiveronlyworks  
with the following SIIG Transmitters:  
-8-PortVGA&AudioTransmitter(CE-VG0221-S1)  
-4-Port VGA & Audio Transmitter (not released)  
-VGA&AudioTransmitterfromCE-VG0112-S1kit  
3
 
Operating Settings  
This section describes how to adjust the VGA & Audio  
Receiver for the best audio and video viewing experience.  
Audio Switch  
Stereo: 2 channel stereo sound  
Mono: normal sound  
BrightnessKnob  
Turnthisknobtoincreaseordecreasethebrightnessofthe  
screen.  
Focus Knob  
Turn this knob to adjust the sharpness of the screen.  
4
 
Blank Page  
5
 
Blank Page  
6
 
Technical Support and Warranty  
QUESTIONS? SIIGs Online Support has answers! Simply visit our web  
site at www.siig.com and click Support. Our online support database is  
updated daily with new drivers and solutions. Answers to your questions  
could be just a few clicks away. You can also submit questions online and a  
technical support analysts will promptly respond.  
SIIGoffersa3-yearmanufacturerwarrantywiththisproduct. Pleaseseeour  
websiteformorewarrantydetails. Ifyouencounteranyproblemswiththis  
product, pleasefollowtheproceduresbelow.  
Ifitiswithinthestore'sreturnpolicyperiod,pleasereturntheproducttothe  
store where you purchased from. If your purchase has passed the store's  
returnpolicyperiod,pleasefollowthesestepstohavetheproductrepairedor  
replaced.  
Step 1: Submit your RMA request.  
Gotowww.siig.com,clickSupport,thenRequestaProductReplacement  
to submit a request to SIIG RMA. If the product is determined to be  
defective, an RMA number willbeissued.  
Step 2: After obtaining an RMA number, ship the product.  
Properly pack the product for shipping. All accessories that came  
withtheoriginalpackagemustbeincluded.  
ClearlywriteyourRMAnumberonthetopofthereturnedpackage.  
SIIG will refuse to accept any shipping package, and will not be  
responsibleforaproductreturnedwithoutanRMAnumberposted  
ontheoutsideoftheshippingcarton.  
Youareresponsibleforthecostofshipping. Shiptheproducttothe  
followingaddress:  
SIIG,Inc.  
6078 Stewart Avenue  
Fremont, CA 94538-3152, USA  
RMA#:  
SIIG will ship the repaired or replaced product via Ground  
in the U.S. and International Economy outside of the U.S. at  
no cost to the customer.  
7
 
About SIIG, Inc.  
Foundedin1985,SIIG,Inc.isaleadingcomputerupgrademanufacturerofI/O  
connectivityproducts,includingPCI&ISAserialandparallelports,USB,Serial  
ATA & UltraATA controllers, FireWire (1394a/b), networking, sound cards,  
andotheraccessories. SIIGisthepremierone-stopsourceofupgrades.  
SIIGproductsoffercomprehensiveusermanuals,manyuser-friendlyfeatures,  
and are backed by an extensive manufacturer warranty. High-quality control  
standards are evident by the overall ease of installation and compatibility of  
ourproducts, aswellasoneofthelowestdefectivereturnratesintheindustry.  
SIIG products can be found in computer retail stores, mail order catalogs,  
throughmajordistributors, systemintegrators, andVARsintheAmericasand  
theUK,andthroughe-commercesites.  
PRODUCT NAME  
VGA & Audio Receiver  
FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS B  
OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE  
FCCCOMPLIANCESTATEMENT:  
This device complies with part 15 of the FCC Rules. Operation is subject  
to the following two conditions: (1) This device may not cause harmful  
interference, and (2) this device must accept any interference received,  
including interference that may cause undesired operation.  
THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE  
SIIG, Inc.  
6078 Stewart Avenue  
Fremont, CA 94538-3152, USA  
Ph: 510-657-8688  
VGA & Audio Receiver is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered  
trademarksofSIIG,Inc. Othernamesusedinthispublicationareforidentificationonlyand  
may be trademarks of their respective companies.  
March, 2012  
Copyright © 2012 by SIIG, Inc. All rights reserved.  
 

Sherwood Stereo System RX 4105 User Manual
Shop Vac Vacuum Cleaner 92L550A User Manual
Silicon Image Network Card SSD P16GI 3100 User Manual
Sony Car Stereo System MEX DV1100 User Manual
Sony Computer Drive MSAC US30 User Manual
Sony DVD Player DVP FX980 User Manual
Sony Satellite TV System SAT W60 User Manual
Sony TV Mount SFM1 User Manual
Speco Technologies Computer Monitor M17LCBVH3 User Manual
Tanaka Chainsaw ECS 330 User Manual