SIIG Log Splitter 104 0732A User Manual

1x4 3G-SDI Splitter  
Quick Installation Guide  
Introduction  
The 1x4 3G-SDI Splitter allows you to broadcast  
3G-SDI signals from one source to four outputs.  
Key Features and Benefits  
Replicates and distributes content from 1  
3G-SDI source to 4 outputs  
Operates at 270Mb/s, 1.485Gb/s and  
2.97Gb/s data rates  
Supports HD formats:  
• 720p24, 25, 30, 50 & 60  
• 1080i50 & 60  
• 1080p24, 25, 30, 50 & 60  
Supports 525i & 625i SD formats  
Metal housing and wall-mountable  
Package Contents  
1x4 3G-SDI Splitter  
Power adapter  
Quick installation guide  
04-0732A  
1
 
Dip Switch  
Re-Clock: Receives a signal and retransmits  
it at a higher level and /or higher power, or  
onto the other side of an obstruction, so the  
signal can cover longer distances  
LB SEL0: Disabled (Not used)  
LB SEL1: Disabled (Not used)  
Note: Pin up: Enabled (on)  
Pin down: Disabled (off)  
LB SEL1  
Re-Clock  
LB SEL0  
(Not used)  
(Not used)  
Figure 2: Dip Switch  
3
 
Blank page  
Do4wnload from Www.Somanuals.com. All Manuals Search And Download.  
Blank page  
5
 
Blank page  
Do6wnload from Www.Somanuals.com. All Manuals Search And Download.  
TechnicalSupportandWarranty  
QUESTIONS? SIIGs Online Support has answers! Simply visit our web site at  
www.siig.com and click Support. Our online support database is updated daily with  
new drivers and solutions. Answers to your questions could be just a few clicks away.  
You can also submit questions online and a technical support analyst will promptly  
respond.  
SIIG offers a 3-year manufacturer warranty with this product. This warranty covers the  
original purchaser and guarantees the product to be free of any defects in materials or  
workmanship for three (3) years from the date of purchase of the product.  
SIIG will, at our discretion, repair or replace (with an identical product or product  
having similar features and functionality) the product if defective in materials or  
workmanship. This warranty gives you specific legal rights, and you may also have other  
rights which vary from state to state. Please see our web site for more warranty details.  
If you encounter any problems with this product, please follow the procedures below.  
A) If it is within the store's return policy period, please return the product to the store  
where you purchased from.  
B) If your purchase has passed the store's return policy period, please follow the steps  
below to have the product repaired or replaced.  
Step 1: Submit your RMA request.  
Goto www.siig.com, clickSupport,then REQUESTAPRODUCTREPLACEMENT  
to submit a request to SIIG RMA or fax a request to 510-657-5962. Your RMA request  
will be processed, if the product is determined to be defective, an RMA number will  
be issued.  
Step 2: After obtaining an RMA number, ship the product.  
Properly pack the product for shipping. All accessories that came with the  
original package must be included.  
Clearly write your RMA number on the top of the returned package. SIIG will  
refuse to accept any shipping package, and will not be responsible for a product  
returned without an RMA number posted on the outside of the shipping  
carton.  
You are responsible for the cost of shipping to SIIG. Ship the product to the  
followingaddress:  
SIIG, Inc.  
6078 Stewart Avenue  
Fremont, CA 94538-3152, USA  
RMA #:  
SIIG will ship the repaired or replaced product via Ground in the U.S. and  
International Economy outside of the U.S. at no cost to the customer.  
7
 
About SIIG, Inc.  
Foundedin1985,SIIG,Inc.isaleadingmanufacturerofITconnectivitysolutions  
(includingSerialATAandUltraATAControllers,FireWire,USB,andlegacyI/  
Oadapters)thatbridgetheconnectionbetweenDesktop/Notebooksystemsand  
external peripherals. SIIG continues to grow by adding A/V and Digital  
Signageconnectivitysolutionstoourextensiveportfolio.  
SIIGproductsoffercomprehensiveusermanuals,manyuser-friendlyfeatures,  
and are backed by an extensive manufacturer warranty. High quality control  
standards are evident by the overall ease of installation and compatibility of  
ourproducts, aswellasoneofthelowestdefectivereturnratesintheindustry.  
SIIG products can be found in computer retail stores, mail order catalogs,  
throughmajordistributors, systemintegrators, andVARsintheAmericasand  
theUK,andthroughe-commercesites.  
PRODUCT NAME  
1x4 3G-SDI Splitter  
FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS B  
OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE  
FCCCOMPLIANCESTATEMENT:  
This device complies with part 15 of the FCC Rules. Operation is subject  
to the following two conditions: (1) This device may not cause harmful  
interference, and (2) this device must accept any interference received,  
including interference that may cause undesired operation.  
THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE  
SIIG, Inc.  
6078 Stewart Avenue  
Fremont, CA 94538-3152, USA  
Phone: 510-657-8688  
1x4 3G-SDI Splitter is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered  
trademarks of SIIG, Inc. All other names used in this publication are for identification only  
and may be trademarks of their respective owners.  
October, 2011  
Copyright © 2011 by SIIG, Inc. All rights reserved  
 

Sennheiser Work Light Set 830 TV User Manual
Sherwood Stereo Receiver RD 6503 User Manual
Shure Microphone w10bt User Manual
Sony Camera Lens VCL0630X User Manual
Sony Car Stereo System Cpa 9c User Manual
Sony DVD Player DVP F5 User Manual
Sony Projection Television KP 41PX1K User Manual
Sub Zero Cooktop CT15G S User Manual
SUPER MICRO Computer Life Jacket 10a User Manual
SUPER MICRO Computer Server 2042G 6RF User Manual