SIIG Computer Hardware 4110 User Manual

Single-Serial PC Card  
Quick Installation Guide  
Introducing the Single-Serial PC Card  
The Single-Serial PC Card adds one high-speed serial port  
(RS232) into your notebook computer to connect various  
types of serial devices.  
KeysFeaturesandBenefits  
Works with notebook computers with one Type II/  
III PC Card/CardBus slot  
Fast 16550 UART supports baud rates up to  
115.2Kbps  
Built-in16-byteFIFObuffertospeedupdatatransfer  
Provides one RJ45-to-serial (DB9) removable cable  
for device connections  
Works with various types of RS232 serial devices  
including modems, PDAs, label printers, bar code  
scanners, digital cameras, and more  
SystemRequirements  
Pentium or equivalent notebook computer with an  
available PC Card slot  
Windows 98/98SE/ME/2000/XP/Server 2003  
Package Contents  
Single-Serial PC Card  
RJ45 to 9-pin serial port cable  
Driver CD  
This quick installation guide  
04-0254C  
 
1
Driver Installation  
Windows98/98SE  
1. At the Add New Hardware Wizard, click Next.  
2. Select Search for the best driver for your device  
(Recommended), then click Next.  
3. InsertthedriverCD,checkCD-ROMdrives,uncheck  
the other boxes and click Next.  
4.  
Click Next, then Finish.  
5. Restart Windows to complete the installation.  
WindowsME  
1. At the Add New Hardware Wizard, choose  
Automatic search for a better ...  
2. Insert the driver CD, click Next, then click Finish.  
3. Restart Windows to complete the installation.  
Windows2000  
1. At the Found New Hardware Wizard, click Next.  
2. Select Search for a suitable driver for my device  
(recommended), and click Next.  
3. Check CD-ROM drives, uncheck the other boxes,  
and click Next.  
4. Click Next and Finish.  
5. Restart Windows to complete the installation.  
3
 
WindowsXP/Server2003  
1. At the Found New Hardware Wizard,  
XP (w/SP1 or earlier)/Server 2003: continue to step #2  
XP(w/SP2orlater)/Server2003(w/SP1orlater): select  
No, not at this time, then click Next.  
2. Choose Install from a list or specific location  
(Advanced), then click Next.  
3. InsertthedriverCD,checkSearchremovablemedia  
(folppy, CD-ROM...), uncheck the other check box  
and click Next.  
4. If the Hardware Installation window pops up, click  
Continue Anyway, then Finish. Our driver has been  
testedforstabilityandcompatibility.  
5. Restart Windows to complete the installation.  
Toverifysuccessfuldriverinstallation:  
1. Check Device Manager to verify successful driver  
installation.  
Windows 98/98SE/ME:From the main desktop, right  
click My Computer, then click Properties. Click  
Device Manager tab.  
Windows 2000/XP/Server 2003: Right click My  
Computer, then click Manage. Click Device  
Manager.  
2. Double click Ports (Com&LPT), find PCMCIA  
RS232-550..., and double click it to display it's  
properties. In the next window This device is  
workingproperlywilldisplaywhentheinstallation  
is successful.  
4
 
Changing COM Port Address  
Some serial devices need a specific COM port in order to  
work. If your serial device works properly, do not  
change this setting. This option is only for Windows  
2000/XP/Server 2003 respectively.  
1. From the Device Manager window double click  
Ports (COM & LPT), then double click PCMCIA  
RS232-550...  
2. Click Port Settings tab and click Advanced.  
3. Click the down arrow that is next to the COM Port  
Number box and select a COM port that is not in  
use. Click OK.  
4. Click OK, then close Device Manager to save the  
changes.  
5
 
Blank Page  
6
 
Technical Support and Warranty  
QUESTIONS?  
SIIG’s Online Support has answers!  
Simply visit our website at www.siig.com and click on Support.  
Our online support database is updated daily with new drivers  
and solutions. Answers to your questions could be just a few clicks  
away. Youcanalsosubmitquestionsonlineandoneofourtechnical  
support analysts will promptly respond.  
A lifetime manufacturer warranty supplied with this product is  
offered by SIIG, Inc. Please see SIIG website for more warranty  
details. If you should happen to encounter any problems with this  
product, please follow the procedures below.  
If it is within the store's return policy period, please return the  
product to the store where you purchased from.  
If your purchase has passed the store's return policy period, please  
follow these steps to have the product repaired or replaced.  
Step 1: Submit your RMA request.  
Go to www.siig.com, click Support, then RMA to submit a  
request to SIIG RMA. If the product is determined to be  
defective,anRMAnumberwillbeissued. SIIGRMAdepartment  
can also be reached at (510)413-5333.  
Step 2: After obtaining an RMA number, ship the product.  
Properlypacktheproductforshipping. Allsoftware,cable(s)  
andanyotheraccessoriesthatcamewiththeoriginalpackage  
must be included.  
Clearly write your RMA number on the top of the returned  
package. SIIGwillrefusetoacceptanyshippingpackage,and  
will not be responsible for a product returned without an  
RMA number posted on the outside of the shipping carton.  
YouareresponsibleforthecostofshippingtheproducttoSIIG  
at the following address:  
SIIG, Inc.  
6078 Stewart Avenue  
Fremont, CA 94538  
RMA#:  
SIIG will ship the repaired or replaced product via Ground  
in the U.S and International Economy outside of the U.S at  
no cost to the customer.  
7
 
About SIIG, Inc.  
Foundedin1985,SIIG,Inc.isaleadingcomputerupgrademanufacturer  
ofI/Oconnectivityproducts,includingPCI&ISAserialandparallel  
ports, USB, Serial ATA & UltraATA controllers, FireWire (1394a/b),  
Networking,SoundCards,andotheraccessories. SIIGisthepremier  
one-stop source of upgrades.  
SIIGproductsoffercomprehensiveusermanuals,manyuser-friendly  
features, and are backed by an extensive manufacturer warranty.  
High-quality control standards are evident by the overall ease of  
installation and compatibility of our products, as well as one of the  
lowest defective return rates in the industry. SIIG products can be  
foundincomputerretailstores,mailordercatalogs,ande-commerce  
sitesintheAmericasandtheUK,aswellasthroughmajordistributors,  
system integrators, and VARs.  
PRODUCT NAME  
Single-Serial PC Card  
FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS  
B OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE  
FCCCOMPLIANCESTATEMENT:  
This device complies with part 15 of the FCC Rules. Operation is  
subject to the following two conditions: (1) This device may not cause  
harmful interference, and (2) this device must accept any interference  
received, including interference that may cause undesired operation.  
THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE  
SIIG, Inc.  
6078 Stewart Ave.  
Fremont, CA 94538-3152  
Single-Serial PC Card is a trademark of SIIG, Inc.  
SIIG and SIIG logo are registered trademarks of SIIG, Inc. Microsoft and Windows are registered  
trademarksofMicrosoftCorporation. PentiumisaregisteredtrademarkofIntelCorporation. Other  
names used in this publication are for identification only and may be trademarks of their respective  
companies.  
July, 2006  
Copyright ©2006 by SIIG, Inc. All rights reserved.  
 

Sharp Air Cleaner FU 40SE K User Manual
Sharp Car Satellite TV System LC 40LE700X User Manual
Sonance Speaker ST2432D User Manual
Sony Car Speaker CDXGT540UI User Manual
Sony Cell Phone D6603 User Manual
Sony Speaker System RDHGTK37IP User Manual
Sony Webcam VPCP11 User Manual
Sunrise Medical Mobility Aid P 222 User Manual
Sylvania Headphones SIP292 User Manual
TANDBERG Network Router D13187 03 User Manual