SIIG Computer Drive 04 0399B User Manual

USB 2.0 Switch  
Quick Installation Guide  
Introducing the USB 2.0 Switch  
The USB 2.0 Switch is designed to share USB device(s)  
between multiple systems.  
FeaturesandBenefits  
Compliant with USB Specifications, Revision 2.0.  
Hot-swapping feature allows you to attach/  
detach USB devices without powering down  
your computer  
Use keyboard Hotkey control (PC only) or  
Power LED/Manual Switching Button to switch  
between computers  
Designed for USB devices including printers,  
scanners, hard disk drives, cameras, CD-ROMS  
and Zip drives  
Note: Not designed to work with keyboard or  
mouse.  
1
Dow04n-lo0a3d99frBom Www.Somanuals.com. All Manuals Search And Download.  
USB 2.0 Switch 2-to-2  
Two Type B connectors for system connection  
Two Type A connectors for USB device  
connection  
Convenient manual switching buttons  
To PC  
(Type B connector)  
Power LED/Manual  
Switching Button  
To USB device  
(Type A connector)  
Figure 1. USB 2.0 Switch 2-to-2 Layout  
3
 
USB 2.0 Switch 4-to-2  
Four Type B connectors for system connection  
Two Type A connectors for device connection  
Convenient manual switching buttons  
Power LED/Manual Switching Button  
To PC  
(Type B connector)  
To PC  
(Type B connector)  
To USB device  
(Type A connector)  
Figure 2. USB 2.0 Switch 4-to-2 Layout  
4
 
Windows Installation  
Important: Do not connect the USB 2.0 Switch to your  
system until after the driver has been installed. In order  
for the driver to install properly the Power LED to that  
system must be switched to another system. For example,  
if you connect port A to system A, make sure the Power  
LED on port A is not lit.  
Windows 98SE  
1.  
2.  
Insert the driver CD after Windows boots.  
AutoRun should start the installation. If  
AutoRun doesn't start, click Start, Run, Type  
D:\setup.exe, then click OK. (Change D: to  
match your CD-ROM drive).  
3.  
4.  
5.  
Select the correct language and click OK.  
Click Next, Next, then Finish.  
Restart your system. After Windows boots,  
connect the USB 2.0 Switch to your systems with  
the USB cables.  
6.  
7.  
8.  
When Windows prompts for the driver again,  
click Next.  
Select Search for the best driver..., and click  
Next.  
Clear all check boxes, click Next, Next, then  
Finish. Click Yes to restart.  
5
 
Note: If prompted for Windows Installation  
CD-ROM, click OK. Insert this CD and click  
OK.  
WindowsME/2000/XP/Server2003  
1.  
2.  
Insert the driver CD after Windows boots.  
AutoRun should start the installation. If  
AutoRun doesn't start, click Start, Run, type  
D:\setup.exe, then click OK. (Change D: to  
match your CD-ROM drive).  
3.  
4.  
5.  
Select the correct language and click OK.  
Click Next, Next, then Finish.  
Restart your system. After Windows boots,  
connect the USB 2.0 Switch to your systems with  
the USB cables.  
WindowsVista™  
1.  
2.  
3.  
4.  
5.  
Insert the driver CD after Windows boots.  
Click Run Setup.exe, then click Allow.  
Select the correct language and click OK.  
Click Next, Next, then Finish.  
Restart your system. After Windows boots,  
connect the USB 2.0 Switch to your systems with  
the USB cables.  
6
 
Windows Device Switching  
HotkeyControl,StatusIndicatorandManualSwitching  
buttons are the three methods that can be used to switch  
devices between systems.  
Note: For Mass Storage devices such as Zip drives, USB  
readers and CD-ROMs, before switching the USB device  
to another system, it must be released from the system  
that controls it. Use Windows' Safely Remove Hardware  
feature, located in the taskbar, to Stop the USB device.  
HotkeyControl  
Press Ctrl+F11 to switch the USB device to the current  
system.  
StatusIndicator  
1.  
The Status Indicator is located in the taskbar by  
the system clock. The indicator has three  
functions:  
Red: Another system is accessing the device -  
switching not allowed.  
Green: The current system controls the device.  
Yellow: No system controls the device -  
switching is allowed.  
7
 
2.  
3.  
Double click the USB Sharing icon to start USB  
sharing program manually.  
Right click the Status Indicator and select Switch  
can also switch USB access to the current  
system.  
Note: Devices such as external hard drives and  
printers send signals back and forth to your  
computer when they are connected. This causes  
theStatusIndicatortoremainred. Switchingisstill  
possible by clicking Yes in the Enforce Switching  
pop-up box.  
ManualSwitching  
PressaPowerLED/Manualswitchingbuttontoswitchto  
another system.  
8
 
Mac OS Installation  
No driver installation is necessary. Simply plug the USB  
2.0 Switch into an available USB port (USB 2.0  
recommended).  
Mac OS Device Switching  
Device switching is controlled by the PowerLED/Manual  
switchingbuttons. Followtheinstructionsbelowforyour  
device type.  
MemoryCardReaders  
1.  
2.  
3.  
Drag the memory card's drive icon into the  
Trashcan.  
Remove the memory card from the card reader  
then press a switching button to change systems.  
Insert the memory card into the reader.  
MassStorageDevices  
CD-ROMs, flash drives, external hard drives and Zip  
drives typically add drive icons to the desktop. Use the  
directions below for switching these devices.  
9
 
1.  
2.  
3.  
Drag the drive icon into the Trashcan.  
Press the switching button to change systems.  
The drive icon will appear on the other system.  
OtherDevices  
Forotherdevicesjustpresstheswitchingbuttontochange  
to another system.  
Connecting USB Devices  
WhenconnectingyourUSBdevice(s)totheUSB2.0Switch,  
follow the USB device's driver installation procedures.  
10  
 
TechnicalSupportandWarranty  
QUESTIONS? SIIG’sOnlineSupporthasanswers! Simplyvisitourwebsiteat  
www.siig.com and click on Support. Our online support database is updated  
daily with new drivers and solutions. Answers to your questions could be just  
afewclicksaway. Youcanalsosubmitquestionsonlineandatechnicalsupport  
analysts will promptly respond.  
A
5-year manufacturer warranty supplied with this product is  
offered by SIIG, Inc. Please see SIIG website for more warranty  
details. If you should happen to encounter any problems with this product,  
pleasefollowtheproceduresbelow.  
If it is within the store's return policy period, please return the  
producttothestorewhereyoupurchasedfrom. Ifyourpurchasehaspassedthe  
store'sreturnpolicyperiod,pleasefollowthesestepstohavetheproductrepaired  
orreplaced.  
Step 1: Submit your RMA request.  
Go to www.siig.com, click Support, then RMA to submit  
a
request to SIIG RMA. If the product is determined to be  
defective, an RMA number willbeissued. SIIGRMAdepartmentcanalso  
be reached at (510) 413-5333.  
Step 2: After obtaining an RMA number, ship the product.  
Properlypacktheproductforshipping. Allaccessoriesthatcamewith  
theoriginalpackagemustbeincluded.  
Clearly write your RMA number on the top of the returned package.  
SIIG will refuse to accept any shipping package, and will not be  
responsibleforaproductreturnedwithoutanRMAnumberpostedon  
theoutsideoftheshippingcarton.  
You are responsible for the cost of shipping the product to SIIG at the  
followingaddress:  
SIIG,Inc.  
6078 Stewart Avenue  
Fremont, CA 94538  
RMA #: ________________  
SIIG will ship the repaired or replaced product via Ground  
in the U.S. and International Economy outside of the U.S. at  
no cost to the customer.  
11  
 
About SIIG, Inc.  
Foundedin1985,SIIG,Inc.isaleadingcomputerupgrademanufacturerofI/O  
connectivityproducts,includingPCI&ISAserialandparallelports,USB,Serial  
ATA&UltraATAcontrollers, FireWire(1394a/b), Networking, SoundCards,  
andotheraccessories. SIIGisthepremierone-stopsourceofupgrades.  
SIIGproductsoffercomprehensiveusermanuals,manyuser-friendlyfeatures,  
and are backed by an extensive manufacturer warranty. High-quality control  
standards are evident by the overall ease of installation and compatibility of  
ourproducts, aswellasoneofthelowestdefectivereturnratesintheindustry.  
SIIG products can be found in computer retail stores, mail order catalogs, and  
e-commerce sites in the Americas and the UK, as well as through major  
distributors, systemintegrators, andVARs.  
PRODUCT NAME  
USB 2.0 Switch  
FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS B  
OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE  
FCCCOMPLIANCESTATEMENT:  
This device complies with part 15 of the FCC Rules. Operation is subject  
to the following two conditions: (1) This device may not cause harmful  
interference, and (2) this device must accept any interference received,  
including interference that may cause undesired operation.  
THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE  
SIIG, Inc.  
6078 Stewart Ave.  
Fremont, CA 94538-3152  
USB 2.0 Switch is a trademark of SIIG, Inc. SIIG and SIIG logo are registered trademarks of  
SIIG, Inc. Microsoft, Windows and Windows Vista are registered trademarks of Microsoft  
Corporation. Mac and Mac OS are registered trademarks of Apple Computer, Inc. Other  
names used in this publication are for identification only and may be trademarks of their  
respective companies.  
October, 2007  
Copyright ©2007 by SIIG, Inc. All rights reserved.  
 

Sharp Microwave Oven R 1200 User Manual
Sharp TV DVD Combo LC 19DV24U User Manual
Shaw Satellite TV System SAC 00 094 User Manual
Soleus Air Air Conditioner GM WAC 06ESE C User Manual
Sony Camcorder Accessories HDR XR500 User Manual
Sony Camcorder MPK DVF5M User Manual
Sony Camera Accessories HDCU 900 User Manual
Speed Queen Clothes Dryer STT30 User Manual
Stiga Lawn Mower 8211 0208 08 User Manual
Swann Home Security System SW244 CVD User Manual